2,800W, with WIDIA disc 410mm, tilt up to 60°, vertical plunge cutting and cutting depth 85 - 165 mm
• With CUprex, the high-performance motor.
• Large cutting depths.
• Maximum stability with minimum weight.
• Tool brake.
Carpenter´s portable circular saws with extraordinary weight/performance ratio. Only possible due to the use of ultra-modern die-cast magnesium alloys. Tiltable to 60°. That make the portable circular saws a universal partner. An easy-to-read scale on the cutting depth adjustment makes work easier and saves tiresome re-measurement. The saw's handling and behavior are refined by smooth starting, constant speeds under load, speed reduction and overload protection. The easy-to-use stop system of the MKS and the adjustable hose connector make your work much easier.
• With tool brake - for optimum operator safety and work processes.
• Constant cut display for 0° - 60° - due to exact center of rotation, which is on the unterside of the base plate.
• Lower saw guard with remote control - for easy release of the saw blade, e.g. when positioning at sharp angles.
Top results, as shown with the MKS 165 Ec, can only be achieved with original MAFELL tools.
The cutting depth can be adjusted easily via a precise handwheel.
The constant cut display.
The tilt range of 0° - 60° enables extreme bevel cuts.
Stop system on both machine sides with triple function.
Standard equipment
1 TCT Saw Blade 410 x 2,5/4,2 x 30 mm / 28 teeth, Ref. No. 092525
1 Αllen key WAF 6 mm, Ref. No. 093081
1 Parallel guide fence
Mains cable 10m (32.8 ft)
Specification
- Easily extendable thanks to a newly designed steel connecting piece.
- Even the extended guide rails are straight like an arrow thanks to the self-aligning connecting piece.
- With removable rubber lip for fast and clean cutting results.
- Very light in weight for optimal handling.
- Guaranteed non-slip assured by two detachable holding strips on the underside of the guide rail.
- Angle cuts executed exactly according to the scale with the MAFELL angle fence.
- The angle fence can be attached to all F-type guide rails with the adapter. Simply attach, adjust and lock the adapter.
- Set the angle required for the cut by referencing the large legible scale, and lock the fence.
3,000W, with WIDIA disc 450mm, tilt up to 60°, vertical plunge cutting and cutting depth 105 - 185 mm.
2.600W, with WIDIA disc 370mm, tilt up to 60°, vertical plunge cutting and cutting depth 65 - 145 mm.
2,500W, with WIDIA disc 330mm, inclination up to 60°, vertical plunge cutting and cutting depth 50 - 130 mm.
