3,000W, with WIDIA disc 450mm, tilt up to 60°, vertical plunge cutting and cutting depth 105 - 185 mm.
• With CUprex, the high-performance motor.
• Maximum cutting depths.
• Maximum stability with minimum weight.
• Tiltable to 60°.
In a class of its own: heavy-duty 3000 watt (4.1 hp) motor for extreme 185 mm (7 5/16 in.) cutting performance! The saw's handling and behavior are refined by smooth starting, constant speeds under load, speed reduction and overload protection. The easy-to-use stop system, the low noise emission and the remote-controlled retractable knife guard make your work much easier. The very smooth-running height adjustment with its clearly legible scale and an effective brake also ensure perfect cutting results and optimum operator safety.
• 3000W motor - for unsurpassed power output with high feed rate.
• Unique ratio between maximum stability and minimum weight.
•High quality standard means lower machine costs and longer service life.
• Constant cut display for 0° - 60° - due to exact center of rotation, which is on the underside of the base plate.
Top results, as shown here with the MKS 185 Ec, can only be achieved with original MAFELL tools.
The cutting depth can be adjusted easily via a precise handwheel.
The constant cut display.
The tilt range of 0° - 60° enables extreme bevel cuts.
Stop system on both machine sides with triple function.
Standard equipment
1 TCT saw blade 450 x 2.5/4.2 x 30 mm (17 11/16 in.), AT, 20 teeth, Ref. No. 092536
1 Parallel guide fence
1 Hose connector Ø 58 mm, Ref No. 202203
1 Allen key WAF 6 mm, Ref. No. 093081
1 Riving knife/splitter, thickness 2,5mm, (1/8 in.) Ref No. 202713
1 Mains cable 10 m (32.8 ft)
Specification
- Easily extendable thanks to a newly designed steel connecting piece.
- Even the extended guide rails are straight like an arrow thanks to the self-aligning connecting piece.
- With removable rubber lip for fast and clean cutting results.
- Very light in weight for optimal handling.
- Guaranteed non-slip assured by two detachable holding strips on the underside of the guide rail.
- Angle cuts executed exactly according to the scale with the MAFELL angle fence.
- The angle fence can be attached to all F-type guide rails with the adapter. Simply attach, adjust and lock the adapter.
- Set the angle required for the cut by referencing the large legible scale, and lock the fence.
2,800W, with WIDIA disc 410mm, tilt up to 60°, vertical plunge cutting and cutting depth 85 - 165 mm
2.600W, with WIDIA disc 370mm, tilt up to 60°, vertical plunge cutting and cutting depth 65 - 145 mm.
2,500W, with WIDIA disc 330mm, inclination up to 60°, vertical plunge cutting and cutting depth 50 - 130 mm.
